DIN ISO and DIN ISO *) are the standards corresponding to DIN , March edition, and DIN , January edition. Find the most up-to-date version of DIN at Engineering DIN Determination of the Tear Strength of Elastomers, Trouser Test Piece, Testing Rubber & DIN › Complete Document History Determination of.

Excellent bonding on metal, primer, paintwork, zinc coating, aluminium, wood, most sthynthetic materials.

Bonded metals can be welded wet on wet, varnished and painted with the current lacquers. The measurement identifies a rubber compound’s viscosity, scorch performance, cure speed and optimum cure. Bonding of characters and name plates on gravestones and fronts.

DIN ISO Trouser, angle and crescent test pieces

Reduces your stock of different products. In addition, there are special inspection procedures depending on the use of the respective article.

Does not attack natural stone like marble, Belgian blue stone and granite.

Amount of inspection The amount of inspection depends largely on the compound’s application profile. The physical data stated in the catalogue are determined using standard test pieces subjected to compression moulding.

As mounting adhesive for bonding of skirting boards, lathing, sidings, eaves, laths, on brick, gyproc, cellular concrete, Ytong, concrete, mortar, etc. Bonding of body parts: Sealing of both PVC and metal tubing, excellent bonding, als on galvanized ducts. The following parameters are normally used. Curemetry inspection is standard at Phoenix and an important part of the approval process for each compound batch. Bonding of isolation, even on wet surfaces.

As sealant on even wet surfaces. Sealing of water leaks, can be used on wet surfaces. Bonding of wooden ore metal table tops.

Curing conditions are determined by the compound’s composition. Please contact us concerning special approval criteria before placing the order.

As bonding ans sealing kit which can be powder coated afterwards. Can be painted perfectly, even with acrylate disperion paints. BOND MS50 is a one component product with a unique bonding capacity on most surfaces, without use of a primer. Bonding of mirrors, does not attack the silver coating always apply the adhesive in vertical lines.

Inspections

During this process the test chamber’s lower half oscillates and the measured reaction torque can be displayed on a monitor or diagrammed. The rheometer measures a compound’s curing properties using a rotational thrust system without rotors.

In the construction of elevators: Bonding of ferrous and non-ferrous plates on window works. Bonded metals can be welded, painted and varnished at once with the current lacquers used in garages.

Latest News

Does not attack acrylate. Joint sealant; sealing of welded and sheet metal work joints – easy to structure and to paint. Bonding and sealing of containers. Ddin 1 product instead of 7.

Inspections – PHOENIX Compounding Technology GmbH

Bonding of several materials. Bonding of spoilers and extensions kits – good adhesion on paintwork and polyester. As sealant for both wet and difficult surfaces. The amount of inspection depends largely on the compound’s application profile. One of the most important inspections for uncured compounds is curemetry for which Phoenix uses Monsanto rheometer in accordance with DIN part 3.